Steel Base Valve With Bulb

Double Adjustable Base Valve Shock

Genesis Adjustable Instructions Sheet

Available With or Without a Schrader Valve To Comply with Rules

The GSB3 is a mono - tube double adjustable base valve it's available in  7" - and 9" stroke and any possible valving or split valving.
 

The GSB3 has a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke. It also has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.

 

The GSB3 is completely rebuildable - revalvable.

Features

  • The GSB3 has the largest true rebound and compression range of adjustments. 3 to 8 on Rebound and Compression is standard, Also available in other ranges. Both adjustments are thru the rod.

  • Large 48mm bore for maximum control and reduction of rod pressure buildup.

  • Largest 75mm built on gas reservoir.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.

  • Hollow chrome-moly shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest high quality, high viscosity index, 100% Synthetic Shock absorber oil virtually 0 thermal expansion.
  • Has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.
  • Double checked  low-speed valving design.
  • Completely independent rebound and compression adjustment.

Advantages

  • Much more traction than standard shocks especially in slick conditions.

  • More driver feel which results in better feedback to adjust to ever changing track conditions.

Standard Eyering Lengths
Series Extended Length Compressed Length  Travel
GSSB3 - 7" 18 3/4 13 1/4 5 1/2 inch
GSB3 - 7" 19 3/4 13 3/4 6 inch
GSB3 - 9" 24 1/4 16 1/4 8 inch
 

You must set nitrogen pressure before use

As all Adjustable Shocks are shipped without  nitrogen.

Caution

Do not force pointer beyond the number range,

 As this may result in internal damage.

To Adjust the Compression or Rebound

To Adjust: Turn knob until arrow points to desired valve setting.

 

Compression Side Adjustment

Rebound Side Adjustment

  • 3600 Coil Over Kit for GS0,GD,GS1,GS2,GS3,GSB1,GSB2 and GSB3 Series Shocks is required for coil over applications with 2 1/2 springs.

  • 3675 Coil Over Kit for 5" Springs for 3675 Coil Over Kit for 5" Springs for GS0,GD,GS1,GS2,GS3,GSB1,GSB2 and GSB3 Series shocks. Series shocks.
  • We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

  • Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GS194-0 or GS195-0 for Sweeping corner tracks and GS196-0 or a GS198-3 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GS190. Also available in G1 series. Adjust your gas pressure accordingly any where from zero to 300 psi.

Now Available!

Remote Adjuster Cable For Adjustable Shocks.

Shock Parts and Accessories

Genesis GSB3 Adjustable Instructions Sheet

Genesis Racing Shocks Catalog

Shock Accessories

Genesis Racing Shocks Apparel

Genesis Offers  Camair Products

 Xtreme Steel Shock Series

 New - GXS0|GXS1|GXS2|GXS3|GXSB1|GXSB2|GXSB3

 Xtreme Aluminum Shock Series

New - GX1|GX2|GX3|GX4|GXB1|GXB2|GXB3|GX4B

 GD|GS0||GS1| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GSB1|GSB2|GSB3|GB1|GB2|GB3 Base Valve Shock Series

Genesis Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted 2006-2015