Steel Base Valve With Bulb

Single Adjustable Shock

Genesis Adjustable Instructions Sheet

Available With or Without a Schrader Valve To Comply with Rules

The GSB2 series is now approved

for USMTS,USRA and Wissota Series use !

Adjustable Shocks.

The GSB2 is a steel mono-tube, adjustable gas shock absorber.  It's available in 7" and 9" stroke and any possible valving.  It has a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke. It also has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.

 

Features

  • The GSB2 has the largest true rebound and compression range of adjustments. 3 to 8 on Rebound and Compression standard,  Also available in 3 to 16.

  • Completely independent rebound and compression adjustment.
  • Large 48mm bore for maximum control.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.

  • Hollow chrome-moly shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest High quality, High viscosity index shock absorber oils.
  • Double checked  low-speed valving design.
  • The GSB2 is completely rebuildable - revalvable.

  • Available With or Without a Schrader Valve To Comply with Rules.

Advantages

  • Much more traction than standard shocks especially in slick conditions.

  • More driver feel which results in better feedback to adjust to ever changing track conditions.

With or without Schrader Valves according to your Rules.


Series Extended Length Compressed Length  Travel
GSSB2 - 7" 18 3/4 13 1/4  5 1/2 inch
GSB2 - 7" 19 3/4 13 3/4 6 inch
GSB2 - 9" 24 1/4 16 1/4 8 inch


To Adjust the Compression or Rebound

To Adjust: Turn knob until arrow points to desired valve setting.

Compression Side Adjustment

Rebound Side Adjustment

Now Available!

Remote Adjuster Cable For Adjustable Shocks.


  • 3600 Coil Over Kit for GS0,GD,GS1,GS2,GS3,GSB1,GSB2 and GSB3 Series Shocks is required for coil over applications with 2 1/2 springs.

  • 3675 Coil Over Kit for 5" Springs for 3675 Coil Over Kit for 5" Springs for GS0,GD,GS1,GS2,GS3,GSB1,GSB2 and GSB3 Series shocks. Series shocks.
  • We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

  • Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GS194-0 or GS195-0 for Sweeping corner tracks and GS196-0 or a GS198-3 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GS190. Also available in G1 series. Adjust your gas pressure accordingly any where from zero to 300 psi


Shock Parts and Accessories

Genesis Racing Shocks Catalog

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

Genesis Camair Products

 Xtreme Steel Shock Series

 New - GXS0|GXS1|GXS2|GXS3|GXSB1|GXSB2|GXSB3

 Xtreme Aluminum Shock Series

New - GX1|GX2|GX3|GX4|GXB1|GXB2|GXB3|GX4B

 GD|GS0||GS1|GS2|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GSB1|GSB2|GSB3|GB1|GB2|GB3 Base Valve Shock Series


Building Winners And Champions One Race At A Time!

Genesis Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted 2006-2015