Non Adjustable Base Valve Shock Absorbers

The GSB1 is a mono-tube, non-adjustable gas shock absorber.  It's available in 7"  and 9" stroke and any possible valving or split valving.  It has large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke. It also has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.

 

Features

  • Large 48mm bore for maximum control and reduction of rod pressure buildup.

  • Largest 75mm built on gas reservoir.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.

  • Hollow chrome-moly shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest high quality, high viscosity index, 100% Synthetic Shock absorber oil virtually 0 thermal expansion.
  • Has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.
  • Double checked  low-speed valving design.

Advantages

  • Much more traction than standard shocks especially in slick conditions.

  • More driver feel which results in better feedback to adjust to ever changing track conditions.

  • The GSB1 is completely rebuildable, and revalvable.

  • 3600 Coil Over Kit for GS0,GD,GS1,GS2,GS3,GSB1,GSB2 and GSB3 Series Shocks is required for coil over applications with 2 1/2 springs.

  • 3675 Coil Over Kit for 5" Springs for GS0,GD,GS1,GS2,GS3,GSB1,GSB2 and GSB3 Series shocks.
  • We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

  • Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GSB194-0 or GSB195-0 for Sweeping corner tracks and GSB196-0 or a GSB198-3 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GSB190. Also available in GS0 and GS1 series. Adjust your gas pressure accordingly any where from zero to 300 psi.

Series Extended Length Compressed Length  Travel
GSSB1 - 7" 17 3/4 12 1/4  5 1/2 inch
GSB1 - 7" 18 3/4 12 3/4 6 inch
GSB1 - 9" 23 1/4 15 1/4 8 inch

 Xtreme Steel Shock Series

 New - GXS0|GXS1|GXS2|GXS3|GXSB1|GXSB2|GXSB3

 Xtreme Aluminum Shock Series

New - GX1|GX2|GX3|GX4|GXB1|GXB2|GXB3|GX4B

 GD|GS0||GS1|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GSB1|GSB2|GSB3|GB1|GB2|GB3 Base Valve Shock Series

Shock Parts and Accessories

Genesis Racing Shocks Catalog

Genesis Offers  Camair Products

Genesis Racing Shocks Instructions Sheet

Shock Accessories

Genesis Racing Shocks Apparel

 Genesis Racing Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted 2006-2015