Steel With Bulb - Non Adjustable Shock


Available With or Without a Schrader Valve To Comply with Rules

Non Adjustable Shocks.

The GS1 is a steel mono-tube, non-adjustable gas shock absorber.  It's available in 7" and 9" stroke and any possible valving or split valving.  It has a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke.

 

Features

  • Large 48mm bore for maximum control.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.

  • Solid Carbo-Nitrided Alloy shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest High quality, High viscosity index shock absorber oils.
  • Double checked  low-speed valving design with .00004" precision components.
  • The GS1 is completely rebuildable - revalvable.

  • Available With or Without a Schrader Valve To Comply with Rules.

The GS1 is completely rebuildable, and revalvable.

With or without Schrader Valves according to your Rules.


Series Extended Length Compressed Length  Travel Weight
GS1 - 7" 19 3/4 12 3/4 7 inch #4.3
GS1 - 9" 23 3/4 14 3/4 9 inch #4.9


Building Winners And Champions One Race At A Time!

Approved!


  • 3600 Coil Over Kit for GD,GS1 and GS0 Series Shocks is required for coil over applications with 2 1/2 springs.

  • 3675 Coil Over Kit for 5" Springs for GS0 and GS1 series shocks.
  • We highly recommend that you check with your chassis builder for their latest  recommendations as technology changes very frequently.

  • Always check the travel on all shocks for rebound extension and compression travel as some cars need a 1" or 2" shock extensions in some applications.

  • Also available in the GS1 and G1 series are standard valvings like GS175, GS176, GS194 and GS195 and so on.
  • Some cars run a shock in front of the left rear to control the motion on acceleration and braking like a GS194-0 or GS195-0 for Sweeping corner tracks and GS196-0 or a GS196-2 for tighter corner tracks. And on slick tracks when hunting for more traction some cars use a dummy shock GS190. Also available in G1 series. Adjust your gas pressure accordingly any where from 50 psi to 200 psi.


Genesis Racing Shocks Catalog

Genesis Racing Shocks Instruction Sheets

Shock Parts and Accessories

Genesis Racing Shocks Apparel

Genesis Offers  Camair Products

Coil Over Springs

Hyperco Complete Catalog..Click here

Hyperco Duel Rate Spring Chart

 Xtreme Steel Shock Series

 New - GXS0|GXS1|GXS2|GXS3|GXSB1|GXSB2|GXSB3

 Xtreme Aluminum Shock Series

New - GX1|GX2|GX3|GX4|GXB1|GXB2|GXB3|GX4B

 GD|GS0||GS1|GS2|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GSB1|GSB2|GSB3|GB1|GB2|GB3 Base Valve Shock Series


Building Winners And Champions One Race At A Time!

Genesis Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted 2006-2015