Double Adjustable Base Valve Shocks

Genesis Adjustable Instructions Sheet

The GB3 is a mono - tube double adjustable base valve it's available in 5" - 6" - 7" - 8" and 9" stroke and any possible valving or split valving.
 

The GB3 has a fully anodized aluminum body with a large built-on gas reservoir. This increases the volume of gas the shock will hold, which lowers the unwanted increase in rod pressure that comes with stroke. It also has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.

 

The GB3 is completely rebuildable - revalvable.

Features

  • The GB3 has the largest true rebound and compression range of adjustments. 3 to 8 on Rebound and Compression is standard, Also available in other ranges. Both adjustments are thru the rod.

  • Large 48mm bore for maximum control and reduction of rod pressure buildup.

  • Largest 75mm built on gas reservoir.

  • High strength 10 turns per inch external threads with adjusting nut locking grooves.

  • Positive stainless steel no-drag scraper to keep any dirt and debris out.

  • Hollow chrome-moly shaft.
  • Low friction Teflon lined self lubricating 1/2 inch bearing on both ends.
  • The finest high quality, high viscosity index, 100% Synthetic Shock absorber oil virtually 0 thermal expansion.
  • Has a base valve that allows the shock to be effectively operated from zero to 300 PSI gauge pressure.
  • Double checked  low-speed valving design.
  • Completely independent rebound and compression adjustment.
  • If more Extended length is needed as in a shock extension it MUST be ordered on shock when ordering like below

Advantages

  • Much more traction than standard shocks especially in slick conditions.

  • More driver feel which results in better feedback to adjust to ever changing track conditions.

Standard Eyering Lengths
Series Extended Length Compressed Length  Travel Weight
GB3 - 5" 15 3/4 11 1/4 4 1/2 inch #3.0
GB3 - 6" 17 3/4 12 1/4  5 1/2  inch #3.2
GB3 - 7" 19 3/4 13 1/4 6 1/2 inch #3.4
GB3 - 8" 21 3/4 14 1/4 7 1/2 inch #3.6
GB3 - 9" 24 3/4 15 3/4 9 inch #3.8
 
Extended Lengths
Series Extended Length Compressed Length  Travel
GB3E5 16 3/4 12 1/4 4 1/2 inch
GB3E6 18 3/4 11 1/4  5 1/2  inch
GB3E7 20 3/4 14 1/4 6 1/2 inch
GB3E8 22 3/4 15 3/4 8 inch
GB3E9 25 3/4 16 3/4 9 inch

You must set nitrogen pressure before use

As all Adjustable Shocks are shipped without  nitrogen.

Caution

Do not force pointer beyond the number range,

 As this may result in internal damage.

The GB3 part numbers for Dirt

7" Stroke = GB375D

7" Stroke off set = GB3075D

7" Stroke off set Big Rebound Right Front GB37BRD or GB307BRD

9" Stroke = GB395D

9" Stroke at 25 3/4 ext length = GB39E5D

Or available in any other specified by customer.

The GB3 part numbers for Pavement

7" Stroke Front = GB375AF

7" Stroke Rear = GB375AR

9" Stroke = GB395A

Or available in any other specified by customer.

To Adjust the Compression or Rebound

To Adjust: Turn knob until arrow points to desired valve setting.

Compression Side Adjustment

Rebound Side Adjustment

Coil Over Kit for G1 series with 2 1/2 springs - part number 3500

Now Available!

Remote Adjuster Cable For Adjustable Shocks.

Genesis Racing Shocks Catalog

Genesis Racing Shocks Instruction Sheets

Shock Parts and Accessories

Genesis Racing Shocks Apparel

Genesis Offers  Camair Products

Coil Over Springs

2011 Hyperco Complete Catalog..Click here

Hyperco Duel Rate Spring Chart

 Xtreme Steel Shock Series

 New - GXS0|GXS1|GXS2|GXS3|GXSB1|GXSB2|GXSB3

 Xtreme Aluminum Shock Series

New - GX1|GX2|GX3|GX4|GXB1|GXB2|GXB3|GX4B

 GD|GS0||GS1|GS2|GS3| G0|G1|G2|G3|G4|G5|G6|G7|G8 Shock Series.

GSB1|GSB2|GSB3|GB1|GB2|GB3 Base Valve Shock Series


Building Winners And Champions One Race At A Time!

Genesis Shocks

5020 Old Ellis Point - Suite 200

Roswell, Georgia  30076

678-659-9454

Fax 678-659-9457

e - mail - Genesisinfo@Genesisshocks.com

Copyrighted 2006-2015